ENERGY AUDIT

The Energy Audit of Energo is a result of a validation of the  energy consumption of building, aiming to provide information in order to identify and quantify the opportunities for energy savings.  
 
The point is to understand how Energy is used, which are the reasons for possible leaks,  and which interventions can be suggested to the client, performing an assessment and a systematic survey of  parameters for the specific consumption and the operating conditions of building and its facilities.  
  
With Energy Audit it is therefore possible:  

  • To define energy balance of building 
  • To characterize procedures of systems energy efficiency 
  • To characterize technical and economic opportunities 
  • To reduce the systems management and maintenance expenses 
  • To improve the comfort 
 
During the diagnostic operations, is provided to collect data about consumption and relative energy costs, data`s about uses of electricity, of  heating, cooling, data of water consumption (power, efficiency factor, working hours, etc). There  are also collected all relative data  about the building as a construction (stratigraphy) and its structure.  
The energetic situation, framed  in this way, is analyzed critically with the aim to identify necessary interventions for reduction of the consumption and of the costs with the  preliminary feasibility assessment.   

 

From this point of view, Energy Audit allow to:  

  • Understand and define the real energy costs 
  • Understand how the energy is consumed  
  • Understand when the energy is consumed  
  • Minimize the waste of energy 
  • Maximize the efficiency 
  • Optimize the energy production (also with the renewable energy) 


Diagnosis report: The report of all data that are related to the consumption of building, basic needs and an analysis of the system in which they are installed:   

  • Measurement of the thermophysical and structural analysis of building 
  • Thermographic report 
  • The detection and the analysis of energy systems and their operating status  
  • Analysis of the maintenance operation status 
  • The evaluation of energy consumption 
  • The analysis and the verification of thermal and insulation systems 
  • The analysis and the verification of BMS 
  • Studies of the interactions occupants vs. energy system 


Interventions Report: List of  all the solutions for the optimization of energy us age, highlighting through energy simulations, the target consumption and the actions to be undertaken  on the systems and facilities for obtaining it.  

The four phases of the Energy Audit process:  
PHASE 1 - "WALK TROUGH AUDIT”  
PHASE 2 -  VALIDATION OF THE ENERGY CONSUMPTION   
PHASE 3 - SIMULATIONS AND SOLUTIONS FOR THE ENERGY SAVINGS  
PHASE 4 - EMS MEASUREMENTS AND REPORTS  

Two of our diagnosis of which we are particularly proud of: 

UŠĆE Shopping Center - Beograd Serbia - 64,000 sqm 
Energy Audits carried out in 2012 
Energy saving performed: 16.52% 

Catholic University - Milan, Italy - 14,000 sqm 
Energy Audit carried out in 2010, 
Energy saving performed: 29.74%